Mechanistic insights into manganese oxide impacting the oxidation and transport of Cr(III) immobilized by nano-zero valent charged ion particles in water-saturated porous media.

The presence of manganese oxide (MnO2) could influence the stability of green-synthesized nano-zero valent iron (nZVI@GT) associated with trivalent chromium (Cr(III)) after its excess application in the in situ remediation of hexachromium (Cr(VI)) contaminated soil. The research findings revealed that the co-transport of the remaining nZVI@GT with Cr(III) was substantially inhibited by high δ-MnO2 concentrations due to the formation of hetero-aggregates between nZVI@GT and δ-MnO2, resulting in an increased irreversible attachment parameter at second-site in a two-site kinetic attachment model. Simultaneously, the Cr(III) complex immobilized on nZVI@GT could be oxidized leading to high levels of Cr(VI) leaching at high δ-MnO2 concentrations. During this process, Mn(IV) was converted to Mn(III)/Mn(II). Subsequently, leachate containing a partial amount of Cr(VI) preferentially adsorbed onto the nZVI@GT surface, enhancing the dispersion of the nZVI@GT and δ-MnO2 agglomerates. Thereafter, nZVI@GT transportability was enhanced with a decreased second-site attachment parameter and the flow content of dissolved Cr(VI) was increased to double, also increasing the potential risk of Cr(VI) being carried by nZVI@GT to underground water systems. This study provides theoretical support for preserving the long-term stability of nZVI@GT after the in situ remediation of heavy metal-contaminated sites in the presence of δ-MnO2.

Design and Implementation of a Chain-Type Direct Push Drilling Rig for Contaminated Sites.

For sites where volatile organic compounds are present, the direct push method, in combination with other sensors for investigation, is a powerful method. The investigation process is an integrated drilling and sensing process, but the trajectory of the probe carrying the sensor is ambiguous. This paper explores and introduces the application of a chain-type direct push drilling rig by designing and building a chain-type direct push miniature drilling rig. This rig allows for indoor experimental studies of direct push trajectories. The chain-type direct push drilling model is proposed based on the mechanism of chain transmission. The drilling rig provides a steady direct thrust through the chain, which is driven by a hydraulic motor. In addition, the drilling tests and results described prove that the chain could be applied to direct push drilling. The chain-type direct push drilling rig can drill to a depth of 1940 mm in single-pass and up to 20,000 mm in multiple passes. The test results also indicate that it drills a total length of 462.461 mm and stops after 87.545 s of operation. The machine can provide a drilling angle of 0-90° and keep the borehole angle fluctuating within 0.6° with the characteristics of strong adjustability, flexibility, continuity, stability, and low disturbance, which is of great value and significance for studying the drilling trajectory of direct push tools and obtaining more accurate investigation data.